If you head to your local mechanic in Minneapolis, MN and tell them that you need your brakes replaced, he or she may ask you precisely what part of the brakes needs to be replaced. While many drivers will give them a blank stare, knowledgeable drivers will know that your vehicle’s brakes are made up of many different parts.
Most drivers are familiar with the brake pedal. It is the rectangle under your foot that you press when you need the car to stop.
When the brake pedal is pushed, it releases the master cylinder. This plunger-like part keeps the brake fluid contained when it is not needed, and releases it when you need it.
Usually made of steel, your brake lines take the brake fluid from the reservoir and carry it to the wheels when the master cylinder is released.
Your vehicles’ rotors can be discs or drums, but both kinds do the same job. They push against the brake pads, causing friction, which stops the car.
Your car can have either disc or drum wheel cylinders. These cylinders hold your brake pads. When the fluid released by the master cylinder reaches them, disc brakes squeeze together while drum brakes pull apart to stop the car.
Finally, your car’s brake pads rub against the drum or cylinder to create friction that stops the vehicle when they are activated by brake fluid.
When you start having trouble with your brakes, take your car to a qualified mechanic as soon as possible, because you may only need to replace one brake part in Minneapolis, MN. Contact Pioneer Rim & Wheel Company.
Connect with us on Facebook and see our latest updates!
