Have you ever been home by yourself and heard the toilet flush? If you have, then this could be an incredibly creepy incident. You might think that you have a ghost living in your home and using the facilities, but the explanation is much less scary.
More often than not, the reason your toilet is “ghost flushing” is due to the fact that it’s losing water. This can occur when you have a weakened flapper. To fix the problem, you’ll need the right supplies for plumbing in Flagstaff, AZ.
Fixing the Issue
The best way to tell if the flapper is to blame is to get a new one. These are inexpensive and can be found in a variety of stores that sell parts for plumbing in Flagstaff, AZ. Since there are so many makes and models of flappers, to ensure you are getting the right one, you might consider taking the old one to the store with you.
Replacing a flapper is incredibly easy. To replace this component, you’ll need to do the following steps.
1. Turn the toilet water off.
2. Empty the tank by holding down the flush handle.
3. Remove the old flapper by detaching the chain and unhooking it from the overflow tube.
4. Install the new flapper by hooking it to the overflow tube and attaching the chain.
To find the right plumbing part to accomplish this task, check out HomCo Lumber & Hardware . They have a wide selection of plumbing parts to take care of ghost flushing or any other issue that might arise.
